Sticker Picture
Vinyl wall stickers adhere to flat surfaces with no need for tape or staple
guns.
Vinyl can be used inside & outside on
walls, windows & much more
Application
Instructions
Choose you're area and wipe with a damp cloth and then dry.
Use
small pieces of tape to stick the Stickerpicture to the wall so you can step
back and check the position.
You can also use a spirit leveller at this point to make sure it's straight.
Put the
Stickerpicture on a table, turn it over and peel away the backing paper away
from the transfer paper.
The
decal should now be sticking to the transfer paper. If bits of the design
stick remain on the backing paper firmly stick it back to the backing paper,
push the two together and repeat the process until it sticks to the transfer
paper. You now have the decal on the transfer paper so be careful as it's
sticky.
Carefully
position the decal on the wall and once happy stick all the transfer paper to
the wall.
Once applied, gently smooth the decal to the wall using a credit card, starting
from the middle and work your way out. This removes air bubbles and lets the
Stickerpicture adhere to the wall better.
Carefully peel the transfer paper away from the wall, starting from one corner
and roll it back along itself keeping pressure on the decal.
Make sure the decal sticks to the wall and does not come off on the transfer
paper, if this happens place the the transfer paper back on the wall and smooth
again with the credit card.
That's it all done :)
(and to remove - just peel off)
